5W20 SN
TORERO ENDURANCE 5W20 SN is formulated for the latest generation petrol, multi-valve, direct injection and turbocharged engines. Specifically produced for gasoline engines equipped with catalytic exhaust treatment systems (TWC) requiring low viscosity oils and friction (Low HTHS) and quality levels of ILSAC GF-5 and API SN.
- 100% Synthetic.
- Saves up to 3% fuel consumption due to low coefficient of friction.
- Provides fast rpm recovery and clean acceleration.
- Extended drain intervals and engine life.
- Exceptional overall anti-corrosion protection.
- Prevents sludge on piston rings and turbo charges.
- Low volatility reduces oil consumption and less Hydrocarbon pollution.
- Advance performance for city stress driving.
TORERO ENDURANCE 5W20 SN is formulated for the latest generation petrol, multi-valve, direct injection and turbocharged engines. Specifically produced for gasoline engines equipped with catalytic exhaust treatment systems (TWC) requiring low viscosity oils and friction (Low HTHS) and quality levels of ILSAC GF-5 and API SN. Torero Endurance 5W20 SN is also applicable to light vehicle engines that run on liquefied fuel LPG type or biofuel like ethanol. 5W-30 SN meets or exceeds the requirements of many leading industry and car manufacturers' standards required for newer modern gasoline powered passenger car engines.
- API SN ILSAC GF-5
- GM DEXOS 1 FORD WSS M2C945A
- GM 6094M
- FORD WSS M2C930A
- Compatible with the previous categories of:
- API, SM, SL & SJ, and ILSAC GF-4,GF-3 & GF-2.
Download Details 
| PHYSICAL AND CHEMICAL CHARACTERISTICS | STANDARD | VALUE |
SAE grade |
SAE J300 |
5W20 |
|
Viscosity at 100°C, Typical (cSt) |
ASTM D-445 |
8,90 |
|
Viscosity index |
ASTM D-2270 |
> 155 |
|
Density at 15 °C, Typical (kg/l) |
ASTM D-1298 |
0,85 |
|
Pour point (°C) |
ASTM D-97 |
< - 35 |
|
Flash point (°C) |
ASTM D-92 |
> 220 |
|
Viscosity CCS at -30 °C, cP |
ASTM D-5293 |
< 6600 |
|
Viscosity HTHS, mPa.s, 150°C |
ASTM D-4683 |
2,8 |
|
Noack volatility, at 250 °C, max (% weight lost) |
ASTM D-5800 |
13 |
|
TBN (mg KOH/g) |
ASTM D-2896 |
≥ 6,0 |