5W30 SN
TORERO ENDURANCE 5W30 SN is formulated with synthetic base oils and state-of-art additives, specially designed to extend the life of existing exhaust emission reduction systems in gasoline and diesel automobiles. 5W-30 SN meets or exceeds the requirements of many leading industry and car manufacturers' standards required for newer modern gasoline powered passenger car engines.
- 100% Synthetic.
- Saves up to 3% of fuel consumption due to low co-efficiency of friction.
- Reduced wear and start time for quick Stop & Start systems.
- Fast rpm recovery and clean acceleration.
- Extended drain intervals and engine life.
- Exceptional overall anti-corrosion protection.
- Prevents sludge on piston rings and turbo charges.
- Low volatility reduces oil consumption and less Hydrocarbon pollution.
- Aids fuel economy.
- Latest generation petrol engines, multi-valve, direct injection and turbocharged.
- Gasoline engines equipped with catalytic exhaust treatment systems (TWC).
- Gasoline engines requiring low viscosity oils and friction (Low HTHS) and quality level ILSAC GF-5 and API SN.
- Light vehicle engines that run on liquefied fuel LPG type or biofuels like ethanol.
- API SN (RC)
- ILSAC GF-5
- GM DEXOS 1
- FORD WSS M2C930A
- GM 6094M / GM 4718A / GM LL-A-025
- FORD WSS 946 A
- CHRYSLER MS 6395
- FORD WSS M2C929A
- Compatible with the previous categories API SM, SL & SJ, and ILSAC GF-4, GF-3 & GF-2.
- Compatible with gasoline engines requiring 5W30 motor oil with: MB 229.3 / 229.1, BMW LL-01, ACEA A1 or A5
- Meet the requirements from the latest gasoline engines manufactured by: HONDA, TOYOTA, HYUNDAI, CHRYSLER, DAIHATSU, FORD, JEEP, LEXUS, MAZDA, NISSAN, SUBARU, ISUZU, and other north American and Asian manufacturers.
Download Details 
| PHYSICAL AND CHEMICAL CHARACTERISTICS | STANDARD | VALUE |
|
SAE grade |
SAE J300 |
5W30 |
|
Viscosity at 100°C, Typical (cSt) |
ASTM D-445 |
10,50 |
|
Viscosity index |
ASTM D-2270 |
> 160 |
|
Density at 15 °C, Typical (kg/l) |
ASTM D-1298 |
0,85 |
|
Pour point (°C) |
ASTM D-97 |
< - 35 |
|
Flash point (°C) |
ASTM D-92 |
> 220 |
|
Viscosity CCS at -30 °C, cP |
ASTM D-5293 |
< 6600 |
|
Viscosity HTHS, mPa.s, 150°C |
ASTM D-4683 |
3,2 |
|
Noack volatility, at 250 °C, max (% weight lost) |
ASTM D-5800 |
13 |
|
TBN (mg KOH/g) |
ASTM D-2896 |
≥ 6,0 |